| The main technical specifications: |
Bench | Work table size | Mm | 750*420 |
T type groove | Mm | 14*3*100 |
Maximum load | Kg | 200 |
Project | X axis travel | Mm | 600 |
Y axis travel | Mm | 400 |
Z axis travel | Mm | 400 |
Distance from spindle nose to the work table | Mm | 130-530 (BT#30) |
Spindle center to Z axis track surface distance | Mm | 480 |
Spindle | The spindle forms | - | Colorectal |
Spindle speed | RPM | 12000 (Mitsubishi) |
Spindle taper | - | BT#30 |
Spindle motor power | KW | 3.7/5.5kw |
Feed | Rapid feed (X/Y/Z) | M/min | 48/48/60 |
The cutting feed | Mm/min | 1-10000 |
Feed motor power (X/Y/Z) | KW | MITSUBISHI: 1.5/1.5/3.5B |
Precision | Positioning accuracy | Mm | 0.010 (Quan Hangcheng) |
Repeat positioning accuracy | Mm | 0.005 (Quan Hangcheng) |
Since the
Dynamic
Change
Knife
And
Knife
Library | The form of ATC / shank type | - | Front flying saucer type /BT#30 |
Tool capacity | Storage cutter | 18 |
Maximum tool diameter (with a knife / non adjacent knife) | Mm | Phi 80/ Phi 120 |
The maximum length of cutter | Mm | 200 |
The maximum weight of the cutting tools | Kg | 3.5 |
Pull plug | - | P30T-1 (45. ) |
Tool change time | SEC | 1.8 |
The
It
| Cutting fluid pump motor power | W | 550 |
Cutting fluid tank capacity | Liter | 200 |
Automatic lubricating motor power | W | 25 |
Automatic lubricating oil tank capacity | Liter | 4 |
Power demand | KVA | 15 |
Pressure demand | Kgf/cm2 | 6 |
Machine weight | Kg | 2600 |
Covers an area of demand (length * width * height) | Mm | 1740*2750*2500 |
